Features:
1、EN2 is designed for linear lifting column with one of 24VDC actuator inside;
2、It is designed to provide vertical lift (only push) in where both need bending and torque force;
3、EN2 has three types: EM2-A(small), EM2-B(medium) and EM2-C(large);
4、There are two processed plates with four holes to fix ;
5、Anodised aluminium, strong and wearproof;
6、Low noise;
7、Nice design ;
8、Protection class: IP54;
Features:
1、EN2 is designed for linear lifting column with one of 24VDC actuator inside;
2、It is designed to provide vertical lift (only push) in where both need bending and torque force;
3、EN2 has three types: EM2-A(small), EM2-B(medium) and EM2-C(large);
4、There are two processed plates with four holes to fix ;
5、Anodised aluminium, strong and wearproof;
6、Low noise;
7、Nice design ;
8、Protection class: IP54;
Dynamic Load Push(N) | 6000 | 4000 | 2000 |
Static Load Push(N) | 6000 | 4000 | 2000 |
Input(VDC) | 24 | ||
Off-center load capacity | Max.1000N at 500mm lever arm length | ||
Speed at Full Load(mm/s) | 3 | 4 | 9 |
Stroke Length(mm) | 100~400 (option >400) | ||
Colour | Silver | ||
Mounting | By screws on the top and bottom plate | ||
Overload Protection | Yes | ||
Limit Switch | Build-in | ||
Duty Cycle | 10%,max.2min. continuous use | ||
IP Grade | IP54 | ||
Operation Temperature | +5°C ~ +40°C | ||
Optional Feature | Hall sensor option | ||
Standard | CE |
*The static load applies when appropriate Jiecang Control-Box is used, which shortcuts the motor during stop.
Overload protection is set in jiecang's own control box
Dynamic Load Push(N) | 6000 | 4000 | 2000 |
Static Load Push(N) | 6000 | 4000 | 2000 |
Input(VDC) | 24 | ||
Off-center load capacity | Max.1000N at 500mm lever arm length | ||
Speed at Full Load(mm/s) | 3 | 4 | 9 |
Stroke Length(mm) | 100~400 (option >400) | ||
Colour | Silver | ||
Mounting | By screws on the top and bottom plate | ||
Overload Protection | Yes | ||
Limit Switch | Build-in | ||
Duty Cycle | 10%,max.2min. continuous use | ||
IP Grade | IP54 | ||
Operation Temperature | +5°C ~ +40°C | ||
Optional Feature | Hall sensor option | ||
Standard | CE |
*The static load applies when appropriate Jiecang Control-Box is used, which shortcuts the motor during stop.
Overload protection is set in jiecang's own control box