- Home
-
Power: input_100-240VAC, 50/60 Hz; The output power is 72W in the rated state, and the output power is 180W in the working mode
Power point light: Yes
Actuator interface: Maximum 4 channels, 6-pin ET bend plug
Handset interface: 1 channel, 10-pin crystal bend insert
Battery interface: 1 channel, 4-pin ET bend plug (output 30uA- when push rod does not operate)
Standby power: Max. 1W (230V)
Color: Grey
Control idea: H-bridge, the service life exceeds 20000 cycles (No relay noise)
Duty cycle: 2/18 @ 25°C; on/off continuous use (180W at 25°C for 120 seconds)
Weight:0.8kg
Actuator compatibility: signal switches(for signal switches)
Battery management: battery power can be turned off at low voltage, battery internal charge and discharge management
IP grade: Max. IPX6
Operate: synchronous drive (no feedback)
Maximum current: 10A total for all channels
Power management: voltage management can ensure maximum power operation and limit output maximum power
Safety system: switching power supply thermal protection ,overcurrent protection
Position: Compatible with actuators equipped with special mounting brackets; bed frame
(via screws, sliding brackets)
Line card: all ports have
Power: input_100-240VAC, 50/60 Hz; The output power is 72W in the rated state, and the output power is 180W in the working mode
Power point light: Yes
Actuator interface: Maximum 4 channels, 6-pin ET bend plug
Handset interface: 1 channel, 10-pin crystal bend insert
Battery interface: 1 channel, 4-pin ET bend plug (output 30uA- when push rod does not operate)
Standby power: Max. 1W (230V)
Color: Grey
Control idea: H-bridge, the service life exceeds 20000 cycles (No relay noise)
Duty cycle: 2/18 @ 25°C; on/off continuous use (180W at 25°C for 120 seconds)
Weight:0.8kg
Actuator compatibility: signal switches(for signal switches)
Battery management: battery power can be turned off at low voltage, battery internal charge and discharge management
IP grade: Max. IPX6
Operate: synchronous drive (no feedback)
Maximum current: 10A total for all channels
Power management: voltage management can ensure maximum power operation and limit output maximum power
Safety system: switching power supply thermal protection ,overcurrent protection
Position: Compatible with actuators equipped with special mounting brackets; bed frame
(via screws, sliding brackets)
Line card: all ports have
